2.13inch E-Paper Eink Display Screen Extension HAT Starter Kit for RPI Raspberry Pi 0 Zero 2 W WH 2W 3 Model B 4 Expansion Board

PACKAGE CONTENT ：(  NOT include Raspberry Pi board.)

This is the V4 version,
Please use the V4 version of the library file!

The V2 and V3 version of e-paper has been discontinued. V2’s test code CANNOT be applied to V3 and V4.

1. 2.13inch e-Paper HAT x1  ( V4 version)

2. RPi screws pack  x1

3. 20cm 8Pin Cable  x1

1

2

3

This is an E-Ink display HAT for Raspberry Pi, 2.13inch, 250×122 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.

Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.

Features

• No backlight, keeps displaying last content for a long time even when power down

• Ultra low power consumption, basically power is only required for refreshing

• Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano

• SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.

• Onboard voltage translator, compatible with 3.3V/5V MCUs

• Wiki English manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

• Wiki English manual :    www.waveshare.com/wiki/2.13inch_e-Paper_HAT

Specifications

• Operating voltage: 3.3V/5V

• Interface: SPI

• Outline dimension: 65mm × 30.2mm

• Display size: 23.71mm × 48.55mm

• Dot pitch: 0.194 × 0.194

• Resolution: 250 × 122

• Display color: black, white

• Grey level: 2

• Partial refresh time: 0.3s

• Full refresh time: 2s

• Refresh power: 26.4mW(typ.)

• Standby power: <0.017mW

• Viewing angle: >170°

Interface

Dimensions

Development Resources

Wiki :  www.waveshare.com/wiki/2.13inch_e-Paper_HAT