INSTRUCTIONS:

1. Mix
the molding powder with3 to3.2 times the amount of powder (300 to
320 mL). Stir quickly until mixture is as smooth as possible. The
mixture will turn a purple/pink color.Remember not to add too much water
to the mixture.
2. After
1 minute, place baby’s hand or foot into this purple molding mixture at
once. Please make sure the hand or foot is completely submerged, and
doesn’t break the surface of the mixture or touch the edge of cup.
3. Try to keep your baby’s hand or foot as still as possible while the molding mixture is setting.
4. Hold
your baby’s foot in the mold for 240 more seconds to ensure the mold is
fully set, then you can very carefully and smoothly remove their hand
or foot from the mold.
5. To ensure a smooth release from the mold, wiggle slightly back and forth so that air can enter the opening of the mold.
6. Once
the hand or foot has been removed, Open bag of plaster powder 50g, and
mix with 1/3 to 1/2 of the amount of water (80 to90 mL). Stir as quickly
until the mixture is as smooth as possible.Do not add too much water to
the stone powder. The higher the concentration the stronger the casting
will be.
7. Slowly pour
the stone powder mixture into the opening of the mold.Gently jiggle the
mold while pouring to ensure the liquid enters all the tiny areas and
to avoid air becoming trapped inside creating air bubbles.
8. After  1 hours
the stone mixture should be set. VERY gently remove the mold away from
the casting. You can very carefully use a knife to help open the mold or
by hand. Ensure open it very slow to ensure that you do not break
the casting.
9. Once the casting is removed you may see a little powder on the surface. It can be washed by water, and air dry over 24 hours.
10. Paint Coat: After 24 hours you can paint your beautiful completed casting any color you wish.