Feature :
PEO Material
Good adhersive on model,especially for PLA;
Beautiful patern on model;
High temperature resistant;
After our extensive testing, we recommend PEO side to print PLA and TPU and PETG.
PEI side print PLA /PETG/PC/ABS /TPU /Nylon etc.

Aplication

Size: 180*180mm (7*7inch)

Applicable with Kingroon KP3S

Size: 220mm*220mm (8.66*8.66inch)
Applicable with MK2/MK2A, Anet A8, Anet A6, Reprap, Mendel, Wanhao Duplicator i3, Monoprice Maker, not suitable for Ender 3, 5 etc

Size: 235mm*235mm(9.25*9.25inch)
Compatible with : Ender 3/Ender 3 S1/ Ender 3 Pro/ Ender 3S/ Ender 3 v2/ CR 20/CR 20 Pro/Ender 5 / Ender 5 Pro

Size: 310mm*310mm(12.2*12.2inch)
Compatible with : Artillery SW-X1 /SW-X2/CR-10/CR10S/Tevo Tornado/ Nereus/Anet A8 Plus/E12 or other same size heated bed.

Size:241mm*253.8mm (9.49*9.99inch)

Comopatible with : For Prusa i3 Mk3+

Advantage:
1. Double-sided printing, convenient and practical
2, High temperature resistance, scratch resistance, no deformation
3. No glue, easy to use
4. Anti-warping and strong stickiness
5, Stainless spring steel, good flatness
6. The printed model can be removed without the help of other tools, can be bent and returned to a flat state, no loss mode
7. Easy to clean, just wipe it off with a wet tissue or alcohol before printing

Instructions:
1. For the first printing, it must be leveled (the distance between the nozzle and the hot bed is generally A4 paper thickness)
2. Tear off the adhesive on the base of the magnetic sticker and stick it on the hot bed platform, pay attention to be flat and do not leave air bubbles
3. Adsorb the PEI side or the PEO side spring steel plate on the magnetic base
4. Start printing, the temperature of the hot bed can be set to 40°C-80°C according to the actual situation (do not exceed 80°C)
5. Take off the printing surface and bend it gently to achieve easy demoulding