For Bambu Lab p1p X1C P1S X1 Upgrade 1.0 2.0 Hotend High Speed Print 3D Extruder High Flow Hardened CHT Nozzle Heater Thermistor

V2.0

Product Material:

Heating block: chromium zirconium copper nickel plating

Throat: titanium alloy+chromium zirconium copper

Nozzles: Hard steel

Radiator: aluminum alloy

Advantages:

1. Use two titanium alloy screws to connect and fix to avoid bending and breaking of the throat during high-speed printing;

2. The radiator and throat can be disassembled and locked with side top screws and titanium alloy screws to reduce usage costs;

3. The heating block is treated with chromium zirconium copper nickel plating, which has fast thermal conductivity and high temperature printing resistance. The titanium alloy throat is wrapped with chromium zirconium copper for better heat dissipation.

Feature

This Kit is Upgraded, the heating block upgraded to chromium-zirconium copper nickel plating treatment, high temperature resistance 500C degree printing, fast heat conduction.

The radiator and heat break can be disassembled and locked by the side fixed shaft to reduce the use cost.

The interference of the TC4 titanium heatbreak tube and the heat block increases the step surface at the bottom of the throat to completely eliminate the phenomenon of falling off and reduces the possibility of leakage.

The nozzle is connected by thread, and in contact with the bottom step of the heatbreak to completely solve the phenomenon of falling off and reduce the possibility of leakage.

Note:
The nozzles had been updated which can not fit for original hotend and it will not work with 3rd party nozzles. The removable nozzle can be replaced easily, Save time.