JAYO 3D Printer PLA Filament 1.75mm PLA PLUS/PETG//ABS Filament 5 rolls as 3D Printing Material Non-Toxic For 3D Printer&Pen

Wire clamp usage:
(Prevent burning of wires)

1.PLA Filament Features & Parameter:

PLA Filament Features :

【Super Neat Filament Spool】JAYO 3D printer filament product line is equipped with an excellent self-developed neat winding device, 100% neat rate, no clogs, making filament easier to use.

【JAYO PLA 3D Printer Filament】PLA filament is the most basic, the most used filament, no clogs, no bubbles, no tangle, SUNLU PLA filament has good layer adhesion, very easy to use.

【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. JAYO filament has wide compatibility due to the small diameter error, making it suitable for almost all 1.75mm FDM 3D printers.

【Filament Spool Diameter】Spool Diameter: 8.00″, Spool Width: 2.50″, Spool Hub Hole Diameter: 2.20″. The size of the JAYO filament spool is suitable for hanging on a lot of FDM 3D printers.

【Recommend Settings】We recommend printing the PLA filament at nozzle temperature of 200-230°C, bed temperature of 50-65°C, and printing speed of 50-100mm/s.

【JAYO Main Products】FDM 3D Printer, 3D Printer Accessories, 3D Printer Filament, Filament Dryer, 3D Pen, 3D Printer Resin, LCD 3D Printer, Resin Curing Box.

PLA Product Parameter:

Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 200-230℃
Bottom plate temperature: need to apply glue when not heating
Heating 60-80℃, no glue
Rally (KGF): 11-16
Melt index: 7-9g/10min
(190℃, 2.16Kg)
Elongation at break: 4%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles
Net weight: 1.1KG/roll
Gross weight: 1.45KG/roll
Length: 1.75MM(1KG)=330M,
3.0MM(1KG)=110M

2.PLA PLUS Filament Features & Parameter:

PLA PLUS Filament Features :

【 100% Wound Neatly Filament】 100% Neatly Wound PLA+ Filament, No knot, no winding, improve printing efficiency.

【 PLA PLUS 3D Filament Advantages】- PLA PLUS filament is 10 times stronger than PLA Filament, the color is brighter, it has many advantages,Clog/Bubble/Tangle/Warping/Stringing free, easy to Use, better layer adhesion.

【1.75mm Diameter】- Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it’s suitable for almost all 1.75mm FDM 3D printers.

【Spool Diameter】- Spool Diameter: 8.00″, Spool Width: 2.50″, Spool Hub Hole Diameter: 2.20″. The size of the JAYO filament spool is suitable for hanging on many 3D printers.

【Recommend Settings】- We recommend printing at a Nozzle/Extrusion temperature of 210°C – 235°C (410°F – 455°F) and Bed/Platform temperature of 55°C – 65°C (131°F – 149°F).

【Strong compatibility】- JAYO 3D Filament is not only applicable to all JAYO 3D printing products: FDM 3D Printer, 3D Printer Accessories, Filament Dyer, but also applicable to almost all FDM 3D printers of other brands. For example: Ender 3/Ender 3V2, etc.

Product Parameter:

Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 210°C – 235°C
Floor temperature: 70-80℃
Rally (KGF): 11-15
Melt index: 9-11g/10min
(190℃, 2.16kg)
Elongation at break: 45%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles
Net weight: 1.1KG/roll
Gross weight: 1.45KG/roll
Length: 1.75MM(1KG)=330M,
3.0MM(1KG)=110M

3.PETG Filament Features & Parameter:

PETG Filament Features:

1. Environmental protection and non-toxic;
2. Bright color;
3. Low shrinkage;
4. Good toughness, not easy to be brittle, good acid and alkali resistance, excellent
The toughness, weather resistance, and good adhesion.
5. Good dimensional stability, no cracks
And warping.
6. High transparency and good gloss.
Suitable for all types of FDM3D printers, suitable
Co-print all kinds of commonly used models, crafts, industry
Pieces, advertising words, etc.

PETG Product Parameter:

Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 230-240℃
Bottom plate temperature: need to apply glue when not heating
Heating 60-80℃, no glue
Rally (KGF): 8-14
Melt index: 6-11g/10min
(220℃, 2.16kg)
Elongation at break: 210%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles
Net weight: 1.1KG/roll
Gross weight: 1.45KG/roll
Length: 1.75MM(1KG)=320M,
3.0MM(1KG)=105M

4..TPU-SILK Filament Features & Parameter:

TPU-SILK Filament Features:

Wire diameter: 1.75mm
Tolerance: ± 0.03MM
Printing temperature: 210-220 ℃
Bottom plate temperature: 50-60 ℃
Printing speed: Near end extrusion: 50mm/s,
Remote extrusion: 30mm/s
Net weight: 1 KG/roll
Gross weight: 1.3 KG/roll
Length: 1.75MM (1KG)=330M

TPU-SILK Product Parameter:

1. Easier to print, no longer painful for remote extrusion
2. Soft and silky, with good elasticity
3. Smooth surface, good appearance texture, similar to silk
4. Supports normal printing speed, making surprises come faster
5. The printing process is stable and will not produce burrs
Environmentally friendly, non-toxic, and cost-effective