LOMEHO 99 Effect 7 Band EQ Sound Mixer 6 Channel Audio Mixing Console USB Play Record Bluetooth 2 AUX DJ Control Table AM-GT6

Item Description

   1. 6 mono channel

   2. Channel 3 Band EQ , main output 7 band EQ

   3. Individual 48V phantom power

   4. 24 Bit 99 DSP effects

   5. USB play & record

   6. Bluetooth function

   7. 2 AUX output

   8. Power supply : DC 12V

 【Note】 The function is described in detail at the end.

1. How to use 48V phantom power？

1）After pressing the "48V PHANTOM" button, the LED light will turn on, now 48V phantom power is working.

2）Phantom power switch for each channel is independent.

3）48V phantom power is only for XLR jack, not for LINE jack.

Note：

1） When use the 48V condenser microphone, please press down"48V PHANTOM" button.

2） When use the dynamic microphone, please do not press down"48V PHANTOM" button.

3） 3.7V computer microphone & non-48V condenser microphone can't work on this device.

2. How to use 24 Bit 99 DSP effects？

1）Select effect : "PARAMETER" knob.

 （1）Rotate the "PARAMETER" knob to the desired effect number, at this time, the number is flashing.

 （2）Press down "PARAMETER" knob to select this effect, at this time, the number is always on.

2）Adjustment of effect parameters : "PROGRAM" knob.

3）Effect output :

（1）Rotate the channel "FX" knob to adjust the effect volume of the channel output.

（2）Rotate the "EFFECT" knob to adjust the effect volume output to the main output.

4）"FX TO AUX1" knob : Adjusts the effect volume output to AUX1 (Need to adjust channel volume at the same time).

Note : There is a protective film on the screen

3. How to Adjust Headphone Volume？

1）Adjust the "MAIN" volume fader.

2）Then adjust the "PHONES" knob.

Note: Headphones hear the same sound as the main output.

4. How to use Bluetooth function？

1） Select Bluetooth status :

（1）The system default is "BLUE" state.

（2）When it is not in the "BLUE" state, long press the "MODE" button to enter the Bluetooth waiting state for connection.

  ——Waiting for connection status : The screen "Bluetooth symbol" flashes.

  ——Successful connection status : The screen "Bluetooth symbol" is always on.

2）Volume adjustment ：

（1）Press down "CH-4/USB" button.

（2）Rotate the "CH-4/USB" knob to adjust the channel volume.

（3）Adjust "MAIN" volume fader.

5. How to playback of U disk？

1）U disk format : FAT32  (NTFS can't work).

2）Play format : MP3, FLAC, WAV, WMA.

3）Adjust volume : A） Rotate the "CH-4/USB" knob to adjust the channel volume.

                               B） Adjust "MAIN" volume fader.

6. How to record of U-disk？

1）Record format : MP3.

2）Recording sample frequency ：16 Bit 48KHz

3）The U-disk cannot be an empty U-disk.

4）Long press "REC" to enter recording mode.

5）Long press "REC" again to exit recording, after exiting the recording, the recording will be played automatically.

7. How to use "GAIN" knob？

1）When the "MAIN" fader is at the "0" position, adjust the channel volume knob. At this time, the output volume is sufficient, and there is no need to adjust the "GAIN" knob.

2）When the output volume is insufficient, adjust the "GAIN" knob.
3）The "PEAK" light cannot be always on, if the "PEAK" light is always on, it means that the signal has been distorted.

4）When "GAIN" is adjusted, it will increase the input of noise

8. How to use AUX port？

AUX output belongs to TS output, only one side has sound.

1）Connect other devices ：

（1）Equalizer;

（2）Effects processor;

（3）Monitor headphones—-only work on one side；

（4）Monitor speakers—-only work on one speaker;

2）AUX OUT volume adjustment ：

（1）Adjust channel "AUX1/AUX2"knob.

（2）Adjust the master control "AUX1/AUX2" knob.

3）"FX TO AUX1" knob : Add effects to AUX1.

（1）Adjust channel "FX" knob.( not need to adjust "EFFECT" knob )
（2）Adjust "MAIN" volume fader.
（3）Adjust "FX TO AUX1" knob.