Anycubic ABS-Like Resin+

Tough and Easy to Post-process

Strong Formula | High Precision | Long Lasting

Specifications
Wavelength:365-405nm 

Elongationat break: 20-30%

Density:1.05-1.25g/cm3  

Shrinkage:3.72-4.24%
Viscosity: 220-250 cP or mPa·s

Flexural strength: 50-60 MPa

Surface hardness:84 HS     

Flexural modulus:1400-1,600MPa
Tensile strength:35-55 MPa      

Conservation period:18 months

Excellent tensile and bending strength

Adding PUA (polyurethane acrylate) to the formula gives the resin excellent tensile and bending strength as well as hardness and toughness.

Excellent hardness and toughness

Easy to clean/Easy to cure /Low odor

High temperature resistance  / Bending resistance

Accuracy

Accuracy: Printing accuracy up to ±0.1mm

Upgraded Formula, Low Odor

ABS-Like Resin+：52.11ppm   Standard Resin：68.04ppm

Wide Compatibility

Especially designed to be compatible with various LCD and DLP 3D printers.

Use Guide

(1) Before use:

Shake the resin well before use;

Clean the resin vat and the building plate, and make sure the bottom of the resin vat is transparent.

(2) When operating:

Unscrew the cap, pour the resin into the vat according to the quantity needed, and set the printer properly.

(3) After use:

After printing, please use the following tools for post-processing: scraper,  diagonal cutting pliers, tweezers, containers, gloves, Ethanol (≥95%), lactate or isopropyl alcohol cleaning solution.

(4) Post-processing:

A. Remove the finished print from the build plate with a scraper;

B. Clean and cure. We recommend to use the Anycubic Wash & Cure Machine for better results.

C. Remove supports, polish and paint, etc…

Note:

1.Shake well before use, prohibiting the use of resin in places where there is a lot of sunlight.
2.Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.

3.Inadvertent contact, as soon as possible to use a lot of water rinse. If you feel unwell, seek timely medical attention.

4.Printed models need to use high concentration alcohol to clean about 30S (recommended concentration of 95% or more, the higher the better).

5.Do not pour the resin in the resin vat into the unused resin, do not leave the resin in the resin vat for a long time without use to avoid resin pollution affect the printing effect(long time without the resin can be introduced into airtight containers or sealed with plastic wrap shading save).