Raspberry Pi 4 Model B 4B RAM 1GB 2GB 4GB 8GB Kit+ Case+32 64 128 GB TF Card+ Power Adapter+ Fan+ Heat Sink+Video Cable for Pi 4

Choose bundle :

We provide different option to choose , the difference between bundles is the RAM of Raspberry Pi 4 ( 1GB,2GB , 4GB or 8GB) and the capacity of SD-compatible card ( 32GB , 64GB or 128GB ) , please refer to the bundle picture or packing list to choose the bundle according to your need.

Choose On Case

Note: Please leave a message in the order for the Case you want, otherwise we send the Case A in default. And if you choose ship from Russia, there is only Case A avalaible.

Introduction :

This is the Raspberry Pi 4 Model B kit , include Raspberry Pi 4 Model B board , ABS case , power supply , heat sink , micro HDMI-compatible cable , SD-compatible card and card reader , which is the basic need for Raspberry Pi.

Why there is no video out put from Raspberry Pi?

1. You can check if the green light flash irregularly. If not, you can write the system to sd card again. ( you can use a latest verion Raspberry Pi OS for testing).
2. Use other SD card to test ( FAT 32 format, at least 8GB)
3. Use other HDMI-compatible cable to test.You can try to connect the Raspberry Pi by SSH to check it the problem is on HDMI-compatible output.
4. Use other power supply (5V 3A at least)
6. Some touh screen need to install driver to use and may only support a few systems. Some touch screen need to revise the config,txt in the sd card to use.

How to understand green indicator light?

When booting from the SD card, the ACT light should flash irregularly. However, it can flash in a more standardized way to indicate a problem:
3 flashes: start.elf not found
4 flashes: start.elf cannot be started, so it may be damaged. Or, the card is not inserted correctly, or the card slot is not working.
7 flashes: kernel.img not found
8 flashes: SDRAM is not recognized. In this case, your SDRAM may be damaged, or bootcode.bin or start.elf cannot be read.
If any of the above situations occurs, please try to use the newly installed Pi operating system of Raspberry's new SD card.

Why the red indicator light of Raspberry Pi is not on?

It can be due to 2 reason usually.
1. The power supply is not working. Find other 5V 3A power to test it.
2. The red indicatoer light of Raspberry Pi is not working.
3. If the red indicator light is flashing, it mean the voltage is not stable. Need to change the power supply.
4. If the power supply is not normal, it can cause some problem for Raspberry Pi. So sometimes the unknow reason problem can be solbed by use another power supply.

How to use the Raspberry Pi?

The Raspberry Pi official website provide the use guide in this link:
https://projects.raspberrypi.org/en/projects/raspberry-pi-setting-up
https://projects.raspberrypi.org/en/projects/raspberry-pi-using

How to assemble the case?

When installing, the action should be a few lighter, in case of acrylic fracture. The acrylic is not so hard as ABS material.

FAQ:

WARNINGS :

• This product should only be connected to an external power supply rated at 5V/3A DC or 5.1V/ 3A DC
minimum 1 . Any external power supply used with the Raspberry Pi 4 Model B shall comply with relevant
regulations and standards applicable in the country of intended use.
• This product should be operated in a well-ventilated environment and, if used inside a case, the case
should not be covered.
• This product should be placed on a stable, flat, non-conductive surface in use and should not be
contacted by conductive items.
• The connection of incompatible devices to the GPIO connection may affect compliance and result in
damage to the unit and invalidate the warranty.
• All peripherals used with this product should comply with relevant standards for the country of use
and be marked accordingly to ensure that safety and performance requirements are met. These
articles include but are not limited to keyboards, monitors and mice when used in conjunction with
the Raspberry Pi.
• Where peripherals are connected that do not include the cable or connector, the cable or connector
must offer adequate insulation and operation in order that the relevant performance and safety
requirements are met.

Raspberry Pi 4 Specifications :

Processor:
Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz

Memory:
2GB/4GB/8GB LPDDR4 (depending on model)

Connectivity:
2.4 GHz and 5.0 GHz IEEE 802.11b/g/n/ac wireless LAN,
Bluetooth-compatible 5.0,
BLE Gigabit Ethernet
2 × USB 3.0 ports
2 × USB 2.0 ports.

GPIO:
Standard 40-pin GPIO header
(fully backwards-compatible with previous boards)

Video & sound:
2 × micro HDMI-compatible ports (up to 4Kp60 supported)
2-lane MIPI DSI display port
2-lane MIPI CSI camera port
4-pole stereo audio and composite video port

Multimedia:
H.265 (4Kp60 decode);
H.264 (1080p60 decode, 1080p30 encode);
OpenGL ES, 3.0 graphics

SD-compatible card support:
Micro SD-compatible card slot for loading operating system and data storage

Input power:
5V DC via USB-C connector (minimum 3A 1 )
5V DC via GPIO header (minimum 3A 1 )
Power over Ethernet (PoE)–enabled
(requires separate PoE HAT)

Environment:
Operating temperature 0–50ºC