WeAct STLink V2.1 Simulator Download Programmer STM32 Minimum System Development Board STM32F103 STM32F411 STM32G431

WeAct Studio STLINK V2.1

STLINK V2.1 is a peripheral based on STM32F103CBT6 microcontroller, which is used for debugging and programming with STM32 series microcontrollers.
It supports a SWD debugging interface and connects to a computer via USB. STLINK V2.1 can be integrated with many debugging environments, such as Keil, IAR, STM32CubeIDE, etc. It also supports OpenOCD and can use GDB for command-line debugging.
STLINK V2.1 has good reliability and stability. It also has many useful features, such as debugging combined with firmware upgrade capabilities. In addition, STLINK V2.1supports password protection, read/write protection, and hardware interface locking.
All in all, STLINK V2.1 is a powerful debugging and programming tool for STM32 that makes the development of embedded applications much simpler and easier.

WeAct Studio DAPLink

DAPLink is an open-source debugging and programming interface firmware for ARM Cortex-M microcontrollers. It provides a bridge between a computer and the target microcontroller, allowing the user to program and debug the microcontroller using software tools such as Mbed Studio, Keil MDK, or IAR Embedded Workbench. DAPLink supports several communication protocols, including SWD and UART, and can be used with a wide range of development boards and evaluation kits. It also includes features such as automatic firmware updates and a USB interface for easy connectivity to a computer. DAPLink is maintained by ARM and is widely used in the embedded systems industry.

WeAct Studio STM32G431CBU6

The STM32G431CBU6 Core Board is a development board based on the STM32G431CBU6 microcontroller. It is designed to provide a low-cost and easy-to-use platform for developing and testing applications based on the STM32G4 series microcontrollers.
The STM32G431CBU6 microcontroller is based on the Arm Cortex-M4 core with a floating-point unit (FPU). It has a maximum operating frequency of 170 MHz and features 128 KB of Flash memory and 32 KB of SRAM. The microcontroller also includes a variety of peripherals, including USB, UART, SPI, I2C, ADC, and DAC.
Overall, the STM32G431CBU6 Core Board is a powerful and versatile development platform for creating applications based on the STM32G4 series microcontrollers.

WeAct STM32F103C8/BT6

The STM32F103C8/BT6 Core Board is a development board based on the STM32F103C8/BT6 microcontroller from STMicroelectronics. It features a 32-bit ARM Cortex-M3 processor core running at up to 72MHz, along with 64KB/128KB of Flash memory and 20KB of SRAM. The board also includes a range of peripherals, including timers, ADCs, DACs, UARTs, SPIs, and I2Cs.
The STM32F103C8T6 Core Board is designed to be used as a platform for developing and prototyping embedded systems. It can be programmed using a variety of software tools, including the Arduino IDE, STM32CubeIDE, and Keil MDK. The board also features a range of interfaces, including USB, UART, and SPI, making it easy to connect to a computer or other devices.
The STM32F103C8T6 Core Board is suitable for a wide range of applications, including industrial control, motor control, and consumer electronics. It is a popular choice among hobbyists and professionals alike due to its low cost, ease of use, and versatility.